| Form factor |
ATX 12V |
| Fan Type |
Remote ON/OFF Control (The Power supply shall accept a logic open collector level which will disable /enable all out put voltage ;excluding +5V standby) |
| Power Factor Correction (PFC) |
Operating 0?~50? Storage -20?~+65? |
| Dielectric withstand |
Input / output 1800VAC for 1 second Input to frame ground 1800VAC for 1 second |
| Watts |
300W |
| Humidity |
5~95% RH |
| Efficiency |
Min 65% Typical 70% (at full load) |
| Power good signal |
Turn-on delay from 100ms to 500ms |
| Overload current protection |
150% Max |
| Over voltage protection |
(+5V output: 6.5V;+3.3V output: 4.6V;+12V output: 15.5 V) |
| Input Characteristics |
Inrush current 60 amps cold, 80amps warm measured at 264Vrms |
| Temperature coefficient |
0.01%/? |
| Transient response |
(output voltage recovers in less than 1 ms max. Following a 25%load change ) |